6% Rabatt

VVDI V3.5.3 China V-A-G Vehicle Diagnostic Interface IMMOPLUS

Ausverkauft. Geschichte 29 verkauft. Art.-Nr.SV30

Neueste Preis: 1,100.00
Sofort Kaufen: 1,029.00 6% Rabatt
Gewicht:
0.7KG
Paket:
23.5cm*17cm*6.5cm     ( Zoll: 9.25*6.69*2.56 )
Rückkehr:
Rückkehr für Rückerstattung innerhalb von 7 Tagen bezahlt Käufer shipping. zurückkehren »


Produktbeschreibung

China V-A-G Vehicle Diagnostic Interface VVDI for the vehicles VW Audi is a Windows-Based diagnostic software. With VVDI, you can perform operations with vehicles from the V-A-G group, which are in most cases unsupported from the producer diagnostic testers. Update frequently.

VVDI China V-A-G Vehicle Diagnostic Interface V3.5.3 Update

Hinweis: For passat b6 and some other vehicles need to buy authorization, cost 550 USD. Pls kindly note it.
For component security funtion, need to open the authorization of reading pin, mac and cs. If you already have the XHORSE key cutter, it is free to get the authorization.
 

  SV86 SV86-B SV86-C
Kurs 2369USD/2134EUR 1550USD/1409EUR 499USD/453.6EUR
Grund-Funktion
VW ×
BMW × ×
Porsche × ×
5th AUDI Autorización +320USD (SV86-2)
BMW OBD Autorización +720USD (SV86-3) +720USD (SV86-3)
BMW CAS4 + Autorización +260USD (SV86-4) +260USD (SV86-4)


VVDI 3.5.3

1.This version need the newest firmware support
2.Fixb bug for A3/TT/R8 CDC32xx
3.Auto reset cluster after change KM in touareg CAN cluster
4.Fixb bug for learn key in touareg k protocol
5.Add new type for 2013 NEC24C64 TFT color display(3D cluster with SW:0703)
6.Add support to flash E type FRF firmware
7.Immobilizer data tool - Santana immobox 24C04 bug fix
8.Immobilizer data tool - Yamaha Moric S29190 bug fix
9.Immobilizer data tool - Fix bug for landrover 9S12
10.Immobilizer data tool - add support GreatWall Delphi immobox 93C66 - 6pins
11.Immobilizer data tool - add support Rover Discovery 3
12.Immobilizer data tool - fix bug for Koleos 9S12 make key with PCF7936 transponder
13.bugfix

VVDI 3.5.2

1. This version DON't need update firmware 
2. Fix bug for KWP2000 protocal update programming
3. Fix bug for Seat 4th immobilizer 2013 NEC+24C64
4. Fix bug for EZS-Kessy 9S12DT128 read EEPROM
5. Fix bug for CDC32xx, A3/TT/R8 login error

VVDI 3.5.1
1.This version DON't need update firmware 
2.Fix bug for write eeprom in NEC35xx type
3.Fix bug for 2013 Q3(NEC+24C64) login error
4.Improved lost all key module
5.Fix bug change KM fro old touareg
6.Improved unit update programming
7.Fix bug for some A3/TT/R8(CDC32xx chip) login error
8.Add one old CDC32xx type support
9.Fix bug for software crash when enter diagnostic unit
10.Fix bug for immobilizer data tool - Mitsubishi ASX
11.bugfix

VVDI 3.5.0
1.This version need the newest firmware support
2.Add NEC35xx dashboard change KM and immobilizer support. Support car after year 2013(Jetta, Bora, Sanata, Lavida family, Rapid, fabia etc)
3.Add nec NEC+24C32 cluster change KM and immobilizer.(6RD920860C/860D)
4.Fix bug for unit update programming with SGO file
5.Support get PIN/CS from Bently ECU 95160 eeprom dump in 4th immobilizer. Fix bug for learn KWP2000 Bently cars.
6.Improve A6/Q7 J518(9S12DT128)reading method, fix bug for some old cars and read VIN error.
7.Improve immobilizer data tool. Fix bug make key for Honda bikes while lost all key.
8.bugfix

VVDI 2.8.2 update(2015-03-25)

1.This version need the newest firmware support
2.Add Update programming function. Support flash unit with frf, sgo, odx files
3.Update autodetect 4th immobilizer and fix bug for immobilizer data tool
4.bugfix

VVDI 2.8.1 update(2014-12-12)

1.This version need the newest firmware support
2.Fix make special transponder ID42
3.Upate Immobilizer Data Tool: Support all lists cars. Add Euro cars:Alfa Romeo, Aprilia, Aston Martin, Audi, Bentley, BMW, Citroen, Dacia, DAF, Ducati, Ferrari, Fiat, Gilera, Iveco, Jaguar, Lancia, LDV, MAN, Maserati, Mercedes Benz, Opel, Peugeot, Piaggio, Polonez, Porsche, Renault, Rover, Saab, Scania, Seat, Skoda, Smart, TagAZ, UAZ, VAZ, Volvo, VW
4.Fix bug for immobilizer data tool
5.Update remote database, support more car
6.bugfix

VVDI 2.8.0 Update Tips (2014-12-04)

1.This version DON't need update firmware
2.Free for all user: decrypt Passat B6/CC comfort module dump, No need condor authorize
3.Add file prepare remote key
4.Upate Immobilizer Data Tool: Support all cars from aisa and USA:Acura, Brilliance, Besturn, Chang An, Great Wall, Chery, Daewoo, Daihatsu, Geely, Haima, Honda, Hyundai, Infiniti, Isuzu, Kawasaki, Kia, Lexus, Mazda, Mitsubishi, Nissan, Proton, Roewe, Saipa, IKCO, SsangYong, Subaru, Suzuki, Tata, Toyota, Yamaha, Buick, Bombardier, Cadillac, Chevrolet, Chrysler, Dodge, Ford, GMC, Jeep, Lincoln, Oldsmobile, Pontiac
5.Fix bug for learn immobilizer with CAN Instrument
6.bugfix

VVDI 2.7.9 update(2014-11-14)

1.This version need the newest firmware support
2.New window for make remote funtion, Use local database, and update online. Support feedbackquestion.
3.Upate Immobilizer Data Tool: Add new car for Kiv, Rover, Volvo; update car for VW, Audi ,Skoda, Seat, Fiat, Suzuki
4.bugfix

Note:VVDI Can downgrade to V19.2 now.
If you do not like the new version, you can downgrade it to v19.2, use V-A-G Commander 8.6 or immo plus 19.2 software.
Downgrade VVDI to V19.2


VVDI 2.7.8 update(2014-10-14)

1.This version DON't need update firmware
2.Fix bug for component protection remove
3.Support write all immo data for A3/TT/R8(-2012)
4.Fix bug for key learn for A3/TT/R8(-2012)
5.bugfix

VVDI 2.7.6 update(2014-08-05):

V-A-G-vehicle-diagnostics-setup-2.7.6.zip

1.This version need the newest firmware support
2.Support adapt engine control unit(support old ecu):Menu->Special function->Adapt unit module->ECU(EDC16/MED9/MED17/Simos)
3.Support read/write ecu flash via OBD(write operation need backup flash first), support IMMO ON/OFF
4.Make remote file format change, please use newest version remote data
5.Add support for vdo kline 7H0920871J
6.Fix bug for change KM: A4L/Q5/A5, A6/Q7(-2012)
7.Fix bug for key learn with CAN protocal
8.Add immo data for BMW EWS1/2/3, CAS1/2/3, Now don't support CAS3+ encrypt version
9.Add immo data for Chrysler voyager(95080), SsangYong Actyon, Mitsubishi ASX, Grandis
10.bugfix

VVDI  Unterstützung Car List:

1 AN002 - KM-CAN
1 AN003 - PIN-CAN
1 AN004 - IMMO panel
1 AN005 - IMMO panel EDC16
1 AN006 - KM/PIN K-Line
1 AN008 - Flash Counters
1 AN009 - Key learning
1 AN010 - Airbag EEPROM
1 AN011 - TV Activation
1 AN012A- EDC16 Odometer
1 AN012B- EDC16 EEP/PIN/IMMO-off
1 AN015 - Flash Memory ECU
1 AN016 - Dealer key learning
1 AN018 - Dealer key learning Q7
1 AN019 - Prepare Dealer Key Q7
1 AN021 - ME7 EEPROM by CAN
1 AN022 - CDC32xx Programmer
1 AN027 - Q7 2008

VVDI V2.0 update:
1.This software need newest firmware support. Please connect your dealer for help.
2.Add tag support. Support 48,Hitag,PCF7935,8E, 13, 4C, 4D, T5 etc.
3.Fix bug OBDII read bcm2 data while lost all key.
4.New window added. Make the software more convenient.
5.Fix bug read PIN from engine control unit. Support more types and enhance the speed read PIN.
6.Fix bug for adapt Immo3/Immo4 ECU bug
7.bugfix

Extra:
1.VVDI 2.0 is last version before China spring festival. Enjoy it. If have question please tell your dealer.
2.In the following year, we will continue provide better and more convenient product to every customer. Please pay attention to our update infomation.
3.Thanks for your support. Happy China spring festival.

V19.2 update
1.Fix bug for some MED17 loadeeprom/flash get PIN,CS,MAC
2.Fix bug for some A6/Q7 OEM key and wirte A6 OEM immo info.
3.Add more car auto detect
4.bugfix

VVDI Immoplus V19.0 update:
1.Immo4 system add 2013 TFT color display support(2013 passat, 2013 tiguan): change KM, add key even lost all key.
2.Immo4 system add 2013 bora JCI support: change KM, add key
3.Immo4 system update 2013 NEC+24C64(support 2013 scirocco): support lost all key
4.Immo4 system support A6/Q7 OEM key, need special OEM key chipset
5.Fix bug for some MED17 ECU read PIN, CS, MAC with OBDII.
6.For immo4 system, you can prepare dealer key without TP chipset, it will generate TP with user choose manufacture
7.You can change 48 chip ID in KEY CHIPSET function, need special 48 chip and immo5 coil
8.Add more car auto detect.
9.This version need newest firmware support
10.bugfix

VVDI Immoplus V18.0 Hochrüstanleitung:

1. Enable to read Pin, CS and MAC for MED17 by OBD in extra function list, or just through eeprom and flash
2. Enable to generate ignition key through OBD without having to remove dashboards for some vehicles with NEC24C32 or NEC24C64 type dashboards. The radio button can be found on key all lost menu
3. Generate the 4th immo key with ID 48 transponder chip according to the hints. Rewritable ID 48 transponder chip, as well as updated the 5th Immo adapter, is needed to support this function
4. Generate A4L/Q5 OEM key (according to the hints), unlock OEM key on key chip menu by using exclusive OEM key and the 5th Immo adapter.
5. Support automatic identification of more car models
6. Firmware update is required to run the new version of IMMOPLUS
7. Bug Fix

VVDI Immoplus V15.0 Hochrüstanleitung:
1.Add "reading out CS, PIN, MAC from Engine" in the additional function menu. Search the 7th byte security code from the working key then generate the dealer key according to the code, to support this function it needs the 5th IMMO Update Tool
2. Work with more car models with NEC+95320 JCI
3. Support more models of automatic identification 
4. To run this software version it requires updating the newest firmware
5. Bug fix

VVDI immoplus V12.8 Hochrüstanleitung:

1.No need to update hardware for run immoplus 12.8
2.Fix the problem that some 5th generation programmer fail to read bcm2 data
3.Fix the problem about failing to adjust A4L/Q5 Meter
4.Fix some bug

China V-A-G Vehicle Diagnostic Interface VVDI function added:
1. Support NEC 24C32, NEC 24C64 change mileage through obd2, generate dealer's keys, read and write EEPROM and backup flash data.
2. Support GOLF5 MM7(9S12) change mileage through obd2, generate dealer's keys, read and write EEPROM and backup flash data.
3. Add TA special chip pre-program. Directly pre-program ID48 to TA2, TA3, TA4, TA5 chips.
Attention: IMMO PLUS7.5 software and V-A-G Commander Software can use VVDI hardware together, but previous VVDI customer need update hardware then can support IMMO Plus software.

VVDI Funktionen:
) Extracting security access codes (PIN) by OBDII
2) Programming keys by OBDII. Preparation of dealer's keys.
3) Mileage recalibration by OBDII
4) Clearing crash data DTCs by OBDII
5) Read/Program flash memory of engine control units by OBDII. Options for resetting the number of flashing attempts.
6) Exchange speed limit of MMI-TV system
1.Standard diagnostic functions:
1) Connect to the device using KWP2000 over TP2.0, KWP2000 over TP1.6, UDS over ISO transport protocol (CAN), KWP1281 or KWP2000 over K-Line
2) For all electronic control units reading identification data
3) For all electronic control units read error (DTCs)
4) For all electronic control units clear error (DTCs)
5) Scan all units
6) Broadcast requests
7) Measured values
8) Adaptation

2.besondere funktion:
1) Instrument CAN
(1) With this function you can establish diagnostic session with the Instrument cluster using KWP2000 over TP2.0
(2) You can read current odometer value
(3) You can change odometer value
(4) Added support for VDO Instrument Cluster 2006+
(5) Read/Program memory of instrument cluster immobilizer
(6) Reading security access code of the IMMOBILIZER
(7) Read/Write immobilizer related data
2) EZS - Kessy (Q7/A6/Allroad)
(1) With this function you can prepare dealer key/learn dealer key
(2) Read/Write eeprom from EZS - Kessy (Q7/A6/Allroad)
3) Instrument K-Line
(1) With this function you can establish diagnostic session with the Instrument cluster via K-Line (KWP1281 or KWP2000)
(2) You can Read/Change odometer value
(3) Read PIN code
(4) Read/Write eeprom
(5) Read ROM/Flash from the Instrument cluster
4) Engine Control Unit
(1) Read MED17 flash memory
(2) Read/Write of flash memory (EDC15, EDC16 all types Read/Write Flashmemory via OBDII (K and CAN). Calculation of checksums while programming, ME7.1.1, MED9.x, ME7.5)
(3) Read/Write flash counters (EDC16)
(4) Read/Write eeprom (V-A-G-EDC15x, V-A-G-ME7.1.1, V-A-G-ME7.1, V-A-G-ME7.5, V-A-G-Cartronic ME7.8.)
(5) Extracting Security access code / PIN (EDC15, ME7.x, V-A-G-Cartronic ME7.8, EDC16
, MED9.x, Simos PPD)
(6) Extracting Component security bytes (EDC15, ME7.x, V-A-G-Cartronic ME7.8, EDC16, MED17.5.1, MED 9.x, Simos PPD)
(7) Enable/Disable immobilizer (EDC15, ME7.x, EDC16)
(8) Odometer correction (EDC15, EDC16)
5) Kessy adaptation
This function can be used for adaptation of brand new kessy units to the car. This adaptation can be by CAN TP2.0, K-KWP2000 and also can be used with Porsche Cayenne.
6) TV activation ED1/ED2
(1) Using this special function you can change speed limit of MMI compatible vehicles to change speed where TV becomes OFF
7) Key learning
With this function you can learn key/transponder to the vehicle
8) Dump tool
With this function you can calculate security access codes, change odometer and so on from EEPROM dump from the corresponding unit
9) Airbag
With this special function you can Read/Write EEPROM memory of the airbag module
Clear the crash data of the airbag module
10) Custom Read/Write
Using this application you can read/program memory in some electronic control unit
11) PIN Convertor
12) Service interval
Using this function you can perform reset of the service reminder, reset of the service interval parameters or change service interval options
13) Remote control adaptation
Using this application, you can learn remote controls
14) Navigation
Using this application, you can enable/disable the "Eject" button of the "Navigation" system
15) Cruise control system
Using this application, you can activate/deactivate a cruise control system and change the related
steering wheel electronics( SWE) configuration if SWE unit is available

Funktion in addition:
1. According to obd2, the latest VVDI supports nec 24c32 mileage change, dealer key generation, EPPROM data reading & writing, FLASH backup.
2. According to obd2, the latest VVDI supports GOLF6 MM7(9S12) mileage change, dealer key generation, EPPROM data reading & writing, FLASH backup.
3. Add the function of professional TA chip pre-program, it directly pre-programs 48 chip into TA2, TA3, TA4, TA5.

V-A-G Vehicle Diagnostic Interface VVDI display:









 
V2019.12 MB SD Connect Compact 4 Star Diagnosis Plus Second Hand Laptop Lenovo X220 I5

V2019.12 MB SD Connect Compact 4 Star mit Lenovo X220 I5


1. Pfosten, 10-17 Arbeitstage, keine Zoll meist.
2. YANWEN Express, 7-10 Werktag, ohne Zoll.
3. DHL: 5-7 Werktag, mit Zoll.

Finden unsere Web auf eurer Telefon:
m.Autoobd.de QC code
Für Fragen, kontaktieren Sie uns bitte unter:
Telefon: +86-13559259264
Whatsapp: +86-13559259264
Skype: AutoOBD.de
Email: sales@AutoOBD.de

Technischer Service

VVDI China VAG Vehicle Diagnostic Interface Software Free Download;VVDI VAG commander software setup and driver install; operation pictures show how to connect VVDI VAG commander to car
How to Update Firmware?

The software can update the firmware by your side:

1. Download the newest software
2. Install the software
3. After installation, there is update option in the software
4. Choose update in the menu
5. Connect VVDI, connect with the internet
6. At last you can update the firmware online

Free download:

ImmoPlus V19.0.rar

ImmoPlus V16.0.rar
ImmoPlus V15.0.rar
ImmoPlus-V13.6-software.zip
vag commander software setup

How to connect VVDI VAG commander to car?

Step 1:


Step 2:

Step 3:

Step 4:

Step 5:


 

vag commander software setup pictures show:

step 6: open my computer


step 7: open VVDI CD





step 8: open vag commander software setup



Some more operation demo pictures as follows:


VVDI Abrites commander for VAG




FAQ

Angaben zur Installation

Q: VVDI bekam beim Lesen "keine Verbindung zum Gerät herstellen", dann habe ich einen anderen Computer verwenden, bekam den gleichen Fehler, ist die serielle Schnittstelle Ok.
A: Bitte überprüfen Sie VVDI Treiber erfolgreich installiert ist, haben keine Ahnung, wie man VVDI Treiber zu installieren, sehen Sie sich bitte das Video-Tutorial auf der Spalte "Video" hochgeladen.

Über Funktion

Q: Was ist in der Ähnlichkeiten und Unterschiede zwischen VAG KM + IMMO TOOL oder VVDI China VAG Vehicle Diagnostic Interface?
A: VVDI Unterstützung machen Schlüssel für VW Audi Skoda Seat, VAG KM + IMMO TOOL wird hauptsächlich verwendet, um Autos zu korrigieren, aber bevor es zu kaufen, müssen Sie sagen uns, das Armaturenbrett Chip-Typ, ob unser Tool die Arbeit mit Ihrem Armaturenbrett zu sehen.

Q: Kann VVDI unterstützt Programmierer Transponder ID48 Krypto VW Golf V 2007 aus?
A: Theoretisch VVDI tun können, beraten Sie haben einen Versuch.

Q: Kann VVDI machen neuen Schlüssel für Polo 2012 sogar alle Schlüssel verloren? Kann VVDI Programm ECU?
A: ja, kann VVDI Schlüssel für Polo 2012 machen auch alle Schlüssel verloren mit
"ImmoPLUS Software", und VVDI ist nicht gut bei der Programmierung ECU für Polo 2012.
 
Q: Was kann eine Kopie der Schlüssel für einen Audi A4 machen 2006

A: Es gibt kein gutes Instrument für sie und vielleicht können Sie für VVDI versuchen.

Q: Welches Werkzeug können Schlüssel und hat Anti-Diebstahl-Funktion für VW (Polo, Golf) oder Audi (A4, A3, A6)?
A: Versuchen Sie VVDI verwenden.

Q: Ich frage mich, ob VVDI le Pin-Code der Wegfahrsperre und schreibt den Schlüssel und Fernbedienung auf 2009 Jetta a / t Leandro
A: Es kann PIN-Code zu lesen. Wie für die Programmierung Schlüssel für Jetta 2009 versuchen, T300 oder VVDI verwenden.

Please take easy to download our available attachments, these downloading link don’t contains attacking virus,they are safe to your cumputer. If the anti-virus software test any of our attachment (especially .exe .zip .rar) containing virus,take easy, please uninstall or exit anti-virus software before download files, otherwise these .exe .zip files may be attacked/broken before you run them.

Notes:
1. Be sure to disable/uninstall anti-virus software

Please note,anti-virus software can flag up this item software as having a virus. This is a false positive and is due to the software containing the application file. So Before setup the device software, please disable/uninstall anti-virus software or install a more reliable free virus scanner! Our this item software is completely safe and virus free and all other virus scanners confirm this.

If the software data is destroyed or lost because you forget to disable/uninstall anti-virus software, please contact our customer service, we arrange to resend you CD or send you the software via internet.

2. Required windows operation system is windows XP
Be sure to setup and run the device software under windows XP. Otherwise the device software and program can be broken or it will fail to work.

Kaufen Sie mehr und sparen Sie mehr
Kunden, die sich das angeschaut haben, schauten sich auch an