New 6" LED OBD-II HUD Head Up Display Over Speeding warning/speed/Km rpm/shift light/temperature +indicator I6 With Compass

Produktbeschreibung

New 6" LED OBD-II HUD Head Up Display Over Speeding warning/speed/Km rpm/shift light/temperature +indicator I6 With Compass

Beschreibung:

HUD wird erforscht und für die Fahrsicherheit entwickelt. Ob der Fahrt im Laufe des Tages oder bei Nachtfahrten und beim Fahren mit hoher Geschwindigkeit oder Fahren bei niedrigen Drehzahlen, die Sie nicht haben, um sich an der Instrumententafel zu suchen. HUD Projekt die wichtige Fahrzeuginformationen (wie beispielsweise Fahrzeuggeschwindigkeit, Motordrehzahl, Wassertemperatur, Kraftstoffverbrauch, etc.) auf die Windschutzscheibe. Also, wenn Sie unterwegs sind, können Sie leicht kontrollieren wichtige Informationen des Autos zu verringern oder zu vermeiden, Unfälle oder Verkehrsunfälle. Zur gleichen Zeit, können HUD Ihre Augenermüdung effektiv verringern, so dass Sie den Fahrspaß und Fahrsicherheit perfekte Einheit zu erreichen.

New 6" LED OBD-II HUD Head Up Display I6 structure:


1) Detecting car’s OBDII interface automatically and all car with OBD II or EUOBD are OK, plug and play;
2) Car speed, engine speed, water temperature, voltage / throttle position / Ignition angle / one-hundred-kilometer acceleration time, instant fuel consumption, average fuel consumption, mileage, fuel shortage reminding, engine faulty, shift reminding, etc. are displayed.
3) Normal display mode, high-speed display mode and automatic display mode are set by yourself;
4) Kilometers and miles are free to switch, which greatly facilitates the dashboard of British Standard;
5) 6 inches display area, easy to read
6) Switch on and off automatically, HUD start when car starting , HUD shutdown when the engine is turning off to protect the car battery effectively; at the same time, you can switch on and off  HUD by Manually Shutdown to protect the battery safety.
7) Single-stage and four-stage overspeed alarm for driving safely.
8) Engine speed alarming so that you can shift timely to save fuel, also has a special significance for the novice;
9) Automatic and manual brightness adjustment mode, no dazzling;
10)  Compass (this function is optional), the precise position, car does not get lost; Accurately determining the position and not get lost

New 6" LED OBD-II HUD Head Up Display I6 Installation Instructions:

1. Make sure if your car complies with OBD II (or EU OBD) interface standard;
2. Open up the engine hood and look for the OBDII sticker. If there is a sticker of “OBDII CERTIFIED” (Figure 2), then you can use our HUD. You can also check if your car have a
diagnostic Interface(the vast majority of cars made in china after 2006 have the diagnostic Interface).
3. If your car has a diagnostic Interface of 16PIN(Figure 3), then plug the OBDII cable with the diagnostic Interface of 16PIN.


The value HUD displays is the value of car inside computer system. Since the value that the car dashboard displays is a little bit different from the value of car inside computer system , so you can enter the setup mode to fine-tune the display value of HUD to achieve exactly the same values that the dashboard displays.

1. Specific setup

Firstly, you need to connect HUD to the car, then press the OK button for 3 seconds to enter the setting mode. You can press the OK button once, the value of Menu 3 increases by 1. The value of Menu 1 increases or decreases by 1 by dialing up or down the dial switch once, which achieves the same values of HUD as the value the car dashboard displays(Dial switch partially shown in Figure 4 and HUD setting interface shown in Figure 5)

1) Enter the setup interface, each parameter adjustment value show as follows Table 1:

 

Menu 3	parameter	Setting range	Specific description	The default value  (Menu 1)
0	Car speed	50-150	50%-150%	100
1	Engine speed	50-150	50%-150%	100
2	Fuel consumption	50-150	50%-150%	100
3	Engine speed alarm	10-75	1000RPM-7500 RPM	50
4	Single-stage / four-stage speed alarm	0-1	0: Manually set up the Single-stage speed alarm; 1: set up the Single-stage speed alarm(60Km/h,80Km/h,100Km/h,120Km/h)	1
5	Single-stage speed alarm value	30-250	30km/h-250km/h	100
6	Display Mode	0-2	0: Automatic display mode- When car speed is less than 80Km / h, HUD displays all parameters, and display car speed and fuel consumption at high-speed mode of over 80Km/h 1: HUD displays all parameters 2: high-speed mode- displaying car speed and fuel consumption	1
7	Brightness adjustment	0-7	0: Automatic brightness adjustment; 1 is the darkest, 7 is the brightest	0
8	Fuel tank capacity	0-150	0L-150L	50
9	Fuel switch	0-2	0: To manually input fuel 1: car has fuel Level Sensor 2: Turn off this function	2
10	Enter the value of oil	0-150	refueling 0 L-150 L	25
11	Discharge capacity setup	0-100	0: Cars with air flow meter 1:Set up the reference fuel consumption (Referring to the Ministry announced fuel consumption value or manufacturer’s corresponding fuel consumption value) setup value:1,2,3,4…,100 means the discharge capacity value of 0.1L, 0.2L,0.3L,0.4L…,10.0L respectively	0
12	Starting Voltage	110-150	11.0V-15.0V	110
13	Shift reminding switch	0-1	0:switch off the Shift reminding 1: switch on the Shift reminding	0
14	Fuel consumption display	0-1	0: switch off the Fuel consumption display 1: switch on the Fuel consumption display	1
15	Reference fuel consumption	10-500	10-500 indicates fuel consumption per 100km from1.0 to 50.0 respectively, the value of 10, 11, ..., 500 represents fuel consumption value of 1.0L/100KM,1.1L/100KM…,50.0L/100KM	80
16	Alarm sound	0-1	0:turn off the Alarm sound 1: turn on the Alarm sound	1
17	Temperature Unit	0-1	0:°C; 1:°F	0
18	Compass switch (optional)	0-1	0:OFF, 1:ON	1

After the above adjusted, please press the OK button of dial switch for three seconds ,then HUD is returned to the display interface or restart the HUD, display interface can also be returned.

2)The specific setup interfaces are shown in Figure 6:


2. For cars without air flow meter, fuel consumption setup is as follows:

A. Firstly, enter the setup mode and find function area 11, set up the car's displacement values, which are 1,2,3,4 ..., 100, that means displacement value is 0.1L, 0.2L, 0.3L, 0.4L ..., 10.0L respectively.

B. Secondly, enter the setup mode and find function area 15 in above tablet 1, set up the reference fuel consumption value (i.e. one-hundred-kilometer standard fuel consumption value) (see the corresponding vehicle fuel consumption value that MIIT( Ministry of Industry and Information Technology) or car manufacturers announced.

3. Resume the default value

Firstly, you start the car and turn off HUD. Then you press OK button and hold the dial switch for five seconds and turn on HUD at the same time. When HUD buzzer issues a "Beep" sound, all parameters resume the default values.

4. Clear fault codes

After HUD connects car, you don’t start the engine and put the car key into the ‘ON’ position. Then HUD shuts down automatically, you press up and hold the dial switch for five seconds. When HUD buzzer issues a "Beep" sound, HUD clears fault codes.

New 6" LED OBD-II HUD Head Up Display I6 Common Operations

1. Switching the display contents

After connecting HUD, you start the car and HUD displays properly.
1.1 Then you press OK button of the dial switch continuously to display the contents of Menu 1 cyclically, such as MPH, KM/H, RPM.
1.2 HUD displays the contents of Menu 2 cyclically, such as V, throttle position, water temperature, ignition timing, 100 kilometers acceleration time (S), Mileage (KM) when you dial up the dial switch continuously.
1.3 HUD displays the contents of Menu 3 cyclically, such as L/100KM, L/H, L when you dial down the dial switch continuously. (Figure 7)

 

Symptom	Possible Causes	Solutions
No car speed alarm	The setup alarm value of the car speed is too high, or car speed alarm switch is off	reset up the reasonable alarm value or turn on the alarm switch
No engine speed alarm	The setup alarm value of the engine speed is too high, or engine speed alarm switch is off	reset up the reasonable engine speed alarm value or turn on the alarm switch
No response after power on	HUD switch is off	Turn on HUD and check whether the plug is inserted firmly
no sound	Alarm sound is off	Turn on the alarm sound
Compass doesn’t show direction (optional function)	Compass switch is off	Turn on the compass switch
Inaccurate fuel consumption	Without air flow sensor	Set up the relevant parameter values
No display	Car does not comply with EU-OBD or OBDII standard	Consulting the automobile manufacturers if the car meets the OBDII standard
No Mileage	Not set up the amount of fuel and some parameters of fuel consumption is set improperly	Manually enter the amount of fuel and adjust the parameters Of fuel consumption properly
Only display car speed and fuel consumption	Car speed is more than 80KM/H	Car speed is more than 80KM/H

Paketliste:

1pc x Host machine of HUD
1pc x Reflecting film
1pc x OBD2 Connecting line
1pc x Instruction Manual
1pc x Non-slip mat

Die Bearbeitungszeit beträgt 48 Stunden. Wenn es ein Wochenende ist, wird die kompatible Zeit verzögert.

Lieferzeit:

Wenn auf Lager in EU / Czech / Amazon / UK, 2-5 Werktage in die EU / UK, keine Mehrwertsteuer.

1. Pfosten, 10-17 Arbeitstage, keine Zoll meist. Für Deutschland und Großbritannien verwenden wir eine neue Postfirma, deren Zustellung nur 6-7 Werktage dauert.

2. YANWEN Express, 7-10 Werktag, ohne Zoll.

3. DHL: 5-7 Werktag, mit Zoll. Zoll hat die Pflicht des Kunden, aber wir schreiben als Standardwert mit niedrigem Wert, um Zollgebühren in Ihrem Land zu sparen. Wenn Sie Zollanforderungen benötigen, schreiben Sie uns bitte, wenn Sie die Bestellung aufgeben.

Finden unsere Web auf eurer Telefon:



Für Fragen, kontaktieren Sie uns bitte unter:

Telefon: +86 181 5015 2701

Whatsapp: +86 181 5015 2701

Email: sales@AutoOBD.de