[Hardware Updated] 2021 New V1.8.0 Xhorse VVDI BIM Tool Pro Enhanced Edition for BMW German Version

Marken: Xhorse Art.-Nr.SK283-B Auf Lager. Geschichte 73 verkauft.

Sofort Kaufen: 917.00
EU-Lieferung, ohne Zoll
Versand:
Kostenloser Versand Express Versand ServiceExpress Versand Service Geschätzte Lieferzeit von China: 3-5 Werktage. Siehe Einzelheiten »
Gewicht:
2.0KG
Paket:
33.6cm*28.3cm*9cm ( Zoll: 13.23*11.14*3.54 )
Rückkehr:
Rückkehr für Rückerstattung innerhalb von 7 Tagen bezahlt Käufer shipping. zurückkehren »

Produktbeschreibung

Xhorse VVDI BIMTool Pro Support BMW E-sys and Rheingold Diagnostic System. Able to replace the specialized devices. (connect via network cable), Support directly read ISN data without disassembling the ECU (N13 / N20 / N55 / N63) .
Xhorse VVDI BIM Tool Pro Enhanced Edition V1.8.0
 
[Hardware Updated on May] 2021 New Xhorse VVDI BIM Tool Pro Enhanced Version in Stock Now. Much better than before!

VVDI BIMTool Pro New Features

1. Support DoIP Vehicle / Module Programming
2. Language: English, Italian, Spanish, German, Hungarian
3. Add Ethernet port, Support 10 / 100M programming via Ethernet.
4. Support BMW ECU programming (NBT / CIC) (connect via network cable)
5. Greatly speed up the F / G Chassis programming (connect via network cable)
6. Support WIFI 802.1b / g, 150Mbps high-speed connection, and WiFi OTA upgrade
7. Support directly read ISN data without disassembling the ECU (N13 / N20 / N55 / N63)
8. Works on All Windows computers, like win7, win8, win10, no computer operating system limitation.
9. Support BMW E-sys and Rheingold Diagnostic System. Able to replace the specialized devices. (connect via network cable)

V1.8.0 VVDI BMW Tool software download

Note:

1. Don't use the Ethernet cable and USB cable at the same time. For key programming, use USB cable, coding use Ethernet cable.
2. When connecting the VVDIBIM device with PC, it will display "Booting" on the little screen, after 20 secs it will display as "BMW", then it is connected OK.
Xhorse VVDI BIMTOOL PRO

VVDI BIM Tool Pro Functions:

OBD Key Learn: Support CAS1/ CAS2/ CAS3/ CAS3+/ CAS3+ISTAP/ CAS4/ CAS4+ version.

File Key Making: Support CAS1/ CAS2/ CAS3/ CAS3+/ ISTAP/ CAS4/ CAS4+,etc. As for CAS1/ CAS2/ CAS3/ CAS3+ system, support reading EEPROM and synchronous code data.
Support FEM/ BDC System Generating Key, Replacing FEM/ BDC Control Units, Reset Mileage.
Mileage Correction: Support CAS1/ CAS2/ CAS3/ CAS3+/ ISTAP/ CAS4/ CAS4+ odometer correction.

Detail Functions of VVDI BIMTool

1. E-Series programming, coding, DTCs
1). Support autodetect car chassis
2). Support scan all car units
3). Support calculate all configuration units
4). Support read/write car configuration(FA)
5). Support input HW/ZB number to programming
6). Support calculate default coding from FA
7). Support edit detail coding information, change car config
8). Support many languages DTC code

2. F-Series programming, coding, DTCs
1). Support autodetect car chassis
2). Support read/write car configuration(FA)
3). Support calculate programming files from unit, car, whole database
4). Support calculate default coding from FA
5). Support edit detail coding information, change car config
6). Support detail special function list from coding
7). Support many languages DTC code

3. CAS1/CAS2/CAS3/CAS3+/CAS3++ISTAP OBD key learning
1). Support read key information, write key information
2). Support key learning
3). Support read/write EEPROM
4). Support read ECU/gearbox synchronize codes
5). Support write ECU/gearbox synchronize codes
6). Support synchronize ECU and CAS
7). Support Synchronize CAS and ELV
8). Support read ISN via OBDII
9). Support reset KM via OBDII
10). Support disable key/enable key

4. CAS4(1L15Y)/CAS4+(5M48H) OBD key learning
1). Support read CAS encrypt key via OBDII
2). Support key learning via a programmer and via the ignition switch
3). Support disable key/enable key
4). Support erase key position
5). Support reset KM via OBDII
6). Support read ISN via OBDII
7). Support backup/restore coding
8). Support update original CAS4 file

5. FEM/BDC OBD key learning
1). Support read FEM/BDC encrypt key via OBDII
2). Support key learning via a programmer and via the ignition switch
3). Support disable key/enable key
4). Support erase key position
5). Support reset KM via OBDII
6). Support read ISN via OBDII
7). Support backup/restore coding
8). Support exchange used FEM/BDC
9). Support close/open transport mode
10). Support reset ECU lock
11). Support switch on the ignition without working key

6. CAS EEPROM dump key learning
1). Support EWS1, EWS2, EWS3, EWS4, CAS1(0K50E), CAS2(2K79X), CAS3(0L01Y), CAS3+(0L15Y), CAS3++ISTAP(0L15Y, 0M23S)
2). Support prepare dealer key via programmer
3). Support disable key/enable key
4). Support read ISN from working key

7. 8HP Gearbox renew
1). Support clear ISN in 8HP gearbox
2). Support backup/restore coding
3). Support reset adaptation information

8. Read synchronize code from E-Series ECU: Support MEV9N46L, MSV70, MSS60, MS450, N62, etc

9. Read E-Series/F-Series ECU ISN via OBDII

1). Support MSV80, MSV801, MSD80, MSD81, MSD802, MSD812, MSD851
2). Support MED17xx/MVD17xx/MEVD17xx/MV1722
3). Support MED172/MEV17N46/ME17N45
4). Support MEVD172Y/MEVD172/MEVD1725/B38/X63TU

10. Support exchange ECU and CAS
1). Support write ECU ISN via OBDII
2). Support write ECU VIN via OBDII
3). Support change ECU ISN and VIN with EEPROM dump
4). Support change CAS1/CAS2/CAS3/CAS4 ISN and VIN with EEPROM dump

11. CAS repair(OBD&EEPROM)
1). Support repair ISTAP CAS
2). Support repair CAS EEPROM(Service mode EEPROM), you can start the engine after repair the file(CAS1, CAS2,CAS3, CAS3+,CAS3++ISTAP)

12. CAS3+/CAS4+ lost all dump file support restore ISN and VIN
1). Support CAS3+(1L15Y) encrypt version
2). Support CAS3++(ISTAP) version
3). Support CAS4+(5M48H) version

13. File KM calibration
1). Support EWS1, EWS2, EWS3, EWS4
2). Support CAS1(0K50E), CAS2(2K79X), CAS3(0L01Y), CAS3+(0L15Y, 0M23S)
3). Support CAS4(1L15Y), CAS4(5M48H, 1N35H)
4). Support E-Series dashboard EEPROM(M35080)
5). Support F-Series dashboard EEPROM(35160, 35128)
14. Unlock HITAG2 key: Support lock hitag2 key made from BMW TOOL via programmer
15. EWS3/EWS4 can read EEPROM, write EEPROM via CAS PLUG


VVDI BIMTOOL Pro Software Display:

BMW TOOL V1.6.2
BMW TOOL V1.6.2
bmw tool v1.6.2
bmw tool v1.6.2
bmw tool v1.6.2
bmw tool v1.6.2
bmw tool v1.6.2
bmw tool v1.6.2

Xhorse VVDI BIM PRO vs. VVDI BMW vs. VVDI2 BMW:

VVDI BIM PRO VVDI BMW VVDI2 BMW
Color Blue Blue Yellow
Functions Locksmith, programming, coding Locksmith, programming, coding Locksmith
Update Software Online for free
Firmware use "update kit" update for free
Software Online for free
Firmware use "update kit"
update for free
Software Online for free
Firmware use "update kit"
update for free
Support System EWS to CAS (1, 2, 3, 3++ 4, 4+) and the latest FEM/ BDC system EWS to CAS (1, 2, 3, 3++ 4, 4+) and the latest FEM / BDC system EWS to CAS (1, 2, 3, 3++ 4, 4+)
Programming Funtion Support Can and DOIP Support Can /


Xhorse VVDIBIM PRO vs VVDI BMW
Item VVDI BIMTOOL Pro VVDI BMW TOOL
IMG bimtool vvdi bmw
Remark In stock Out of stock
Language Chinese, English, Italian, Spanish, German, Hungarian, Polish Chinese, English, Italian, Spanish, German, Hungarian, Polish
Program E/F chassis Yes Yes
Code E/F chassis Yes Yes
Learn OBD key

Yes

for CAS1 / CAS2 / CAS3 / CAS3+ / CAS3+

ISTAP / CAS4 / CAS4+

Yes

for CAS1 CAS2 CAS3 CAS3+

CAS3+ISTAP CAS4 CAS4+

File make key

Yes

for CAS1 CAS2 CAS3 CAS3+

ISTAP CAS4 CAS4+, etc.

Yes

for CAS1 CAS2 CAS3 CAS3+

ISTAP CAS4 CAS4+, etc.

Gnerate key for FEM/BDC system Yes Yes
Correct mileage

Yes

for CAS1 CAS2 CAS3 CAS3+

ISTAP CAS4 CAS4+ and FEM / BDC system

Yes

for CAS1 CAS2 CAS3 CAS3+

ISTAP CAS4 CAS4+ and FEM/BDC system

Read EEPROM & synchronous code data

Yes

for CAS1 CAS2 CAS3 CAS3+

Yes

For CAS1 CAS2 CAS3 CAS3+

Get ECU ISN Yes Yes
Support synchronous ECU and CAS, synchronous ELV and CAS Yes Yes
Reset 8HP gearbox in F chassis Yes Yes
Exchange ECU and CAS Yes Yes
Add ethernet port Yes, support 10/100M programming via Ethernet No
WiFi Yes, support WIFI 802.1b/g, 150Mbps high-speed connection, and WIFI OTA upgrade No
DoIP Vehicle/Module Programming Yes No
BMW ECU programming (NBT/CIC) Yes, connect via network cable No
Speed up the F/G Chassis programming Yes, connect via network cable No
BMW E-sys and Rheingold Diagnostic System Yes, able to replace the specialized devices (connect via network cable) No
Read N13/N20/N55/N63 ISN data without disassembling Yes No


Package List:

1pc x VVDI BIMTool Pro Main Unit
1pc x OBD Cable
1pc x Ethernet Cable
1pc x USB Cable
1pc x ECU Reflash Cable
1pc x Plastic Box

Die Bearbeitungszeit beträgt 48 Stunden. Wenn es ein Wochenende ist, wird die kompatible Zeit verzögert.

Lieferzeit:


Wenn auf Lager in EU / Czech / Amazon / UK, 2-5 Werktage in die EU / UK, keine Mehrwertsteuer.

1. Pfosten, 10-17 Arbeitstage, keine Zoll meist. Für Deutschland und Großbritannien verwenden wir eine neue Postfirma, deren Zustellung nur 6-7 Werktage dauert.

2. YANWEN Express, 7-10 Werktag, ohne Zoll.

3. DHL: 5-7 Werktag, mit Zoll. Zoll hat die Pflicht des Kunden, aber wir schreiben als Standardwert mit niedrigem Wert, um Zollgebühren in Ihrem Land zu sparen. Wenn Sie Zollanforderungen benötigen, schreiben Sie uns bitte, wenn Sie die Bestellung aufgeben.

Finden unsere Web auf eurer Telefon:

m.Autoobd.de QC code

Für Fragen, kontaktieren Sie uns bitte unter:


Telefon: +86 181 5015 2701

Whatsapp: +86 181 5015 2701

Email: sales@AutoOBD.de