Read and write ECU data without disassembling the ECU using the OBD2 Bench or GTP Bench method or disassembling the ECU and using the Boot method.Equipped with a short-circuit-proof BOOT resistance board connection line to protect the ECU, you can use it with J2534 devices and PCMFLash software.
VXSCAN ENET WIFI/USB Adapter DoIP worked with iOS, Android & Windows,which needs to be used with the diagnostic software. It doesn't come with software.
P004 adapter is designed for ECU programming, reading or writing data in bench mode. With P004 airbag reset kit, multi-functions can be completed in one tablet device. It is compatible with Odo master full version and OBDSTAR X300 DP Plus C full version.
The CG100X D1 adapter is used to repair/change VAG MQB D70F34XX and D70F35XX processor mileage without soldering.
Xhorse XDNPRBGL MQB-RH850/V850 Adapter work with KEY TOOL PLUSEasy Reading, Stay Simple.No need to cut wire or lift pin to read MQB48/MQB49/5C dashboards
Autel MaxiIM series released new VAG software update-reading immo data from VAG MQB48 series NEC35XX dashboard. The APB130 work together with the XP400 Pro will allow you to add the key and read immo data for VW MQB NEC35XX, as well as several supported vehicles.
Brand New V11.0 Software HDD, Pre-installed. Works with VCX SE 6154 & VCX NANO 6154Comes with Windows 10 Pro 64bit systemwith Engineering V14.1
OBDSTAR Toyota-30 cable is mainly used for all keys lost and password-free matching operation of 8A-BA and 4A models of Toyota's latest smart key box with 30 pins. Using Toyota-30 cable, there is no need to break, hook, or plug and unplug wires during operation, and there is no risk of damaging communication wires!Work with Autel MaxiIM/ X300 DP PLUS/ X300 DP Key Master.
Supports BOSCH MPC5xx platform mode ECU: MED9.1, MED9.5, MED9.5.10, ME9.0, EDC16CP31, EDC16CP35, EDC16C2, EDC16C8
Autel MaxiSYS MSOBD2KIT Non-OBDII adapter kits include OE-compliant adapters for specific vehicles produced between 1996 and 2002 without the standard OBD2 pin configuration. The kits are compatible with certain Autel diagnostic tablets and they include carrying case
XHORSE XCCD30GL 2.5mm Engraving Cutter PN: XCCD30, used for engraving on key blanks to customize exclusive keys for customers.
Lonsdor LT20-03 8A+4D Smart Key PCB for Toyota Alphard Werefard
1. Support DOIP-ENET communication2. Support diagnostic programming and coding for BMW Benz, Volkswagen, Audi and other vehicles that support DOIP protocol. [no software is provided.]3. Can be used for diagnostic programming and coding of Land Rover, VOLVO, and Geely vehicles that support DOIP communication. [no software is provided.]4. With voltage display5. When the voltage is lower than about 11.5v, an alarm will sound to remind the customer that the voltage is low and startup cannot be performed. Diagnostics or programming are not possible.
Support Mazda smart keySupport regenerate and reuse
2 interface design: OBD male connector to 2 female connectors, One-to-Two conversionEasy to connect, plug and play. 180° free adjustment.
CH-01: Toyota H Non-smart Key All Keys Lost AdapterCH-02: Toyota 24 Pin Smart Key All Keys Lost AdapterCH-03: Toyota 27 Pin Smart Key All Keys Lost Cable
Used in local area network (LAN) function (car enters Service Mode), currently supported products: X-431 PAD V, PAD VII series, EV MAX, X431 PRO 3S+ V3.0/V5.0 etc diagnostic tools with Simplified Chinese, Traditional Chinese, Japanese, Korean, Arabic and Russian software.