Full protocol OBD2 jumper is used to connect ECU for ECU programming via OBD2 way such as MPPS, FGTECH, KESSV2, BYSHUT, DISPROG, etc.Full protocol OBD2 jumper can be used with OBDSTAR P50/ X300 DP PLUS Full Version/ Odo Master Full Version for Airbag Reset
Supports Android & iOS.Good for DIY users, Battery service station, Garage/workshop, Tool store, Vehicle/Battery manufacturer.
This is a brand new data link cable, used specifically for connecting your OBD2 scanner and your vehicle with this 20 pin connector which is specifically for BMW's.
Used with tools from AUTEL, LAUNCH, XHORSE,etc.Full protocol OBD2 universal jumper is used to connect ECU for ECU programming via OBD2 way such as MMPS, FGTECH, KESSV2, BYSHUT, DISPROG, etc.
Mercedes Benz ME9.7 ME 9.7 ECU ECM Engine Computer Programming Meanwhile, compatible with all series of 273 engine 4.6L 4633CC V8/ 5.5L5641CC V8.
Autel G-BOX3 is an adapter compatible with Autel’s MaxiIM IM608 and MaxiIM IM508 tablets (with the purchase of XP400Pro programmer) that aids in the programming of keys to Mercedes DAS3 CAN EIS/EXS vehicles in an ALL Keys Lost situation. The G-Box3 also supports DME/DDE ISN Reading and Writing in Boot Mode on applicable BMW vehicles. Bench Method is also supported. All Keys Lost password calculations are approximately 4x to 8x faster.
EIS / ELV Testlinie für MercedesKeine Notwendigkeit haben Auto für TestKönnen Sie mit VVDI MB BGA arbeitet/Xhorse Key Tool Plus
Sprinter 14Pin to 16Pin Adaptor Für BENZhohe Qualität und besten Preis
OBD2 16 pin Male to Female extension cableLength: 1.5M
By working together with Godiag GT100 & Xhorse vvdi 2 / BMW VVDI bim tool / Lonsdor k518 / Autel IM608 etc, Godiag CAS4 / CAS4+ test platform can program new key when all keys lost, can add new key and replace CAS4 / CAS4+ ECU module.
Godiag GT106 used with EasyDiag, EasyDiag 3.0, Golo Green Adition, M-DIAG, IDIAG, ICarScan, Diagun, GOLO, DBScar II.
12PIN Cable for Renault Can Clip V145 Diagnostic Tool
Cable EEPROM SOIC-8CON for Tacho Universal
GODIAG-Testplattform für die BMW FEM / BDC-Programmierung, kostenloser Versand per Post, ein spezielles Gerät, das für BMW Schlosser, Wartungsingenieure und FEM / BDC-Programmierer entwickelt wurde.
OTOCHECKER 2.0 IMMO CLEANER is an advanced Immobilizer repair tool used to repair immobilizer problems in vehicles with faulty ECU's or immo boxes or in situation where all keys have been lost. No need shipping. Send via Email.hohe Qualität und besten Preis
Flat LCD Connector for MB W210 / W202/W208 RIGHT Lcd of Dashboardhohe Qualität und besten Preis
OBDSTAR CAN direct kit is used to read ECU data of gateway vehicles. Split design is easy to connect with more ECU cables. Support Toyota Corolla 4A promoxity key programming(free PIN code) operating on cars directly. Works with OBDSTAR X300 DP/ X300 DP PLUS/ X300 PRO4/ Key Master DP.
Xhorse all key lost cable for Ford is used to connect to Xhorse VVDI key tool plus pad for key programming, when all keys are lost, which works for Ford / Lincoln cars. With its help, you do NOT need to turn off the battery over and over again while the alarm is on. Since the manufacturer is Xhorse, of course, the good quality is guaranteed.
Flat LCD Connector for MB W210/W202/W208 Central LCD of dashboardhohe Qualität und besten Preis
2x2 to OBD2 Adapter for Audi connecting the 2x2 port in older (1990 to 1995) pre OBD I vehicles to the OBD II connector for current generation diagnostic tools, together works with VAG-COM KKL 409. USB INTERFACEhohe Qualität und besten Preis