GODIAG GT100 Pro Breakout Box ECU Tool mit BMW CAS4 CAS4+ und FEM/BDC Testplattform verwendet mit AUTEL IM508 IM608 VVDI2 CGDI BMW

Marken: GODIAG Art.-Nr.SO537-B+SK310+SK348 Auf Lager. Geschichte 41 verkauft.

Sofort Kaufen: 195.00
4 GODIAG GT100: GT100 Pro + BMW CAS/FEM/BDC Test Platform GODIAG GT100 Pro Breakout Box ECU Tool mit BMW CAS4 CAS4+ und FEM/BDC Testplattform verwendet mit AUTEL IM508 IM608 VVDI2 CGDI BMW
HKSO537-B-OD,HKSK310-OD,HKSK348-OD
Versand:
Kostenloser Versand Express Versand ServiceExpress Versand Service Gesch?tzte Lieferzeit von China: 5-7 Werktage. Siehe Einzelheiten »
Gewicht:
2.0KG
Rückkehr:
Rückkehr für Rückerstattung innerhalb von 7 Tagen bezahlt Käufer shipping. zurückkehren »

Produktbeschreibung

  1. 1. GODIAG GT100 Pro Breakout Box with BMW CAS4 CAS4+ and FEM/BDC Test Platform.
  2. 2. Used with AUTEL IM508, IM608, VVDI2, VVDI KEY TOOL PLUS, CGDI BMW, Lonsdor K518ISE and so on.
Godiag GT100+ GT100 Pro OBDII Breakout Box ECU Bench Connector with Electronic Current Display

GODIAG GT100+ Highlights

1. 1-year warranty.
2. Used with KESS V2 and Ktag
3. ECU connection + OBDII Protocol Detector + Electronic Current Display
4. The cable can be extended, with an Optional dedicated adapter
5. Compatible with tools from LAUNCH, AUTEL, FOXWELL, XHORSE, VXDIAG, and so on
6. Convert the OBD1 diagnostic interface to the standard OBD2 diagnostic interface
7. Used with BMW-CAS4 Adapter test platform to detect whether the CAS4 key programming work perfectly or not

GT100+ Pro vs. GT100

1. GT100+ adds Electronic Current Display.
2. GT100+ Adds CANBUS Protocol Communication
3. Reset instrument/immobilizer when all keys lost

GODIAG GT100+ is the latest testing platform for OBDII protocol communication detection and ECU maintenance/diagnosis/programming/coding And after all the keys are lost, the instrument and the anti-theft system are forced to activate by short-circuiting.

GT100+ has a voltage and current display. It is convenient for maintenance engineers to judge the current working status of ECU.

It can convert the car OBD2 interface into 16 pins for signal detection and electrical level conversion. Able to connect the single modules or multiple modules of the vehicle. It can be connected with any diagnostic tool to tell whether the car's communication is good or not. It can also supply power to the car when you change the battery to avoid the vehicle control module data being lost, automatically locked, the key remote control fails and the fault light turns on.

godiag GT100

GODIAG GT100+ Function and Operation Guide

By connecting the vehicle and diagnostic tool via OBDII, Godiag GT100+'s LED will indicate whether the OBDII diagnostic interface has good communication with the car.
Monitor the voltage of the vehicle OBDII interface and display it in real-time. If it is less than 11V, please stop the diagnosis and programming to avoid the vehicle being unable to start/data loss/module locked.
gt100 display
Used to check whether the diagnostic / programming/coding tool can send communication signals.
use to check diagnostic signals
ECU connection: single module connection

GODIAG GT100+, connected to a single ECU module, is convenient for a user to do the single-module diagnosis and programming.
gt100 connected to a signal  ECU module
GT100+ program key for VW, Porsche, Mitsubishi, etc with all keys lost - activate the instrument or immobilizer module.

A. To program VW 4th generation / 5th generation Lost all keys (for example new A6L Touareg A4 Q5 A7), please use GT100+ to short-circuit banana connector PIN 16----PIN 1 to lit up the dashboard, aft that use the key programmer tool to connect with the female adapter of GT100+ for data collection. Some vehicle dashboards won't be lit up, but data can also be collected, for example, A6L Q7.
B. To replace the engine ECU of Toyota or to use some key programmer to program Toyota when all keys lost, it needs to short-circuit PIN13-PIN4
C. To program Mitsubishi key with all keys lost or to set OBDII when all remote keys lost, please short-circuit PIN1-PIN4.
D. To program Porsche Cayenne key with all keys lost or with all remote key lost, please short circuit PIN3-PIN7.
gt100+program key for VW
Voltage and Current Value Display function

On the bench connect the ECU module by using the banana connector or db25 dedicated ECU interface, and Godiag GT100+ will display the voltage / current value.
The user can intuitively see the current status of the ECU. There is no current display or The actual displayed current is inconsistent with the engineer's expected current, then you can immediately check whether the wiring is wrong, if the wiring is correct, he can judge that the ECU may be broken, so there is no need to perform diagnostic communication and can directly repair the ECU.

If it shows too much current, then you can also determine if the cable is wrongly connected or the ECU is broken.
wrong connected or ECU is broken
GT100+ Pin 1, 9, 3, 11 12, 13, 8 [corresponding to the yellow banana connector on the machine], these non-standard obd2 protocol interfaces may display CAN BUS or K-Line communication protocols. GT100+ can only display K- Line PWM VPW+ KWP 2000 protocol. GT100+ will display CANBUS K-Line Pwm Vpw+ KWP 2000 protocol communication.

Quickly communicate with a single ECU on the bench by connecting with the ECU diagnostic/programming tool. [This allows the engineers or technicians to complete the job on the bench and keeps away the risk of data loss in other modules when directly testing on the vehicle.]
gt100+pin1,9,3,11,12,13
More details about GT100 Pro

GODIAG FEM BDC Test Platform for BMW

Godiag FEM / BDC programming test platform is a dedicated device developed for BMW locksmiths, maintenance engineers, and FEM / BDC programming engineers.

Godiag FEM test platform can program a new key when all keys lost, can add a new key to the BMW FEM BDC vehicle on the bench.
few/bdc+test platform
GODIAG BMW CAS4 & CAS4+ Test Platform

Godiag CAS4 / CAS4+ test platform is a dedicated device developed for BMW locksmiths, maintenance engineers, and CAS4 CAS4+ programming engineers.

1. By working together with Godiag GT100 & xhorse vvdi 2 / BMW vvdi bim tool / Lonsdor k518 / Autel im608 etc, Godiag CAS4 / CAS4+ test platform can program a new key when all keys lost, can add new key and replace CAS4 / CAS4+ ECU module.

2. Before installing back the CAS4 CAS4+ module to the car, you are allowed to connect this test platform to the CAS module to test whether it can communicate or there is any malfunction.

3. Used to read out & back up the data after preprocessing, used to replace CAS4 / CAS4+ immobilizer module (for example: replace 2-port CAS4 with 3-port immobilize system with comfort access.)

4. Before installing the CAS4 / CAS4+ module back to the car, it can be used to test whether the programmed key synchronizes with cas4 cas4+.

5. Godiag CAS4 CAS4+ test platform can help expand business for the Engineers who are skilled to program CAS4 /CAS4+ key.
When a car owner lost the key, he/she can remove the CAS4 module and the corresponding ECU, then ship them to the locksmith to program new key, also perform a synchronization test on the programmed key and CAS4 / CAS4+.

6. Troubleshooting - when the key can't start the car, This test platform can pinpoint whether it is caused by the mismatch between cas4 cas4+and the key.

7. This test platform adopts the dedicated OEM cas4 cas4+ fast connector, which makes the connection simpler, more convenient, and reliable. It will not bend the communication pin of the CAS4 CAS4+ module.

godia for bmw test platform

Package includes:

1pc x Host
1pc xOBD 2-in-1 extension cable
1pc xColored jumper cable
1pc xPower supply 12V
1pc xResistance 120 ohm
6pcs xBanana plug
24pcs xWire accessories, Dupont 2.54mm connector female pins
1pc x BMW CAS4 CAS4+ Test Platorm
1pc x BMW FEM BDC Test Platorm
 

Die Bearbeitungszeit beträgt 48 Stunden. Wenn es ein Wochenende ist, wird die kompatible Zeit verzögert.

Lieferzeit:


Wenn auf Lager in EU / Czech / Amazon / UK, 2-5 Werktage in die EU / UK, keine Mehrwertsteuer.

1. Pfosten, 10-17 Arbeitstage, keine Zoll meist. Für Deutschland und Großbritannien verwenden wir eine neue Postfirma, deren Zustellung nur 6-7 Werktage dauert.

2. YANWEN Express, 7-10 Werktag, ohne Zoll.

3. DHL: 5-7 Werktag, mit Zoll. Zoll hat die Pflicht des Kunden, aber wir schreiben als Standardwert mit niedrigem Wert, um Zollgebühren in Ihrem Land zu sparen. Wenn Sie Zollanforderungen benötigen, schreiben Sie uns bitte, wenn Sie die Bestellung aufgeben.

Finden unsere Web auf eurer Telefon:

m.Autoobd.de QC code

Für Fragen, kontaktieren Sie uns bitte unter:


Telefon: +86 181 5015 2701

Whatsapp: +86 181 5015 2701

Email: sales@AutoOBD.de

Kaufen Sie mehr und sparen Sie mehr
Optionale Teile und Zubehör
Kunden, die sich das angeschaut haben, schauten sich auch an