2022 Launch X-431 PAD VII plus LAUNCH X-431 GIII Advanced Immobilizer & Key Programmer with VCI Automotive Diagnostic Tool Support Online Coding

Produktbeschreibung

2022 Launch X-431 PAD VII with VCI Automotive Diagnostic Tool Support Online Coding + LAUNCH X-431 GIII Advanced Immobilizer & Key Programmer
Powerful Special Functions:

Component Replacement, Cylinder Compression Test, Injector Cut Out Test, DPF Regeneration, Communicates with ABS & Transmissions from Bendix, Wabco and Allison, Tech to Tech remote communication function

The powerful Smartlink VCI powers the diagnostic to a new level. Users are available to perform remote diagnosis without being on-site and
the limitation of diagnostic functions, tools, and vehicle types.
It is able to assist technicians to identify the OBDII port pin automatically and display the real-time voltage for voltage condition
monitoring during live diagnostics.



Functions:

1. Check the DTCs and all systems communication status visually by topology module mapping function.
2. Auto-detects the communications protocol of the vehicle uses, assist to check OBDII connector pin is damaged or not.
3. Powerful diagnostic functions (intelligent diagnosis, remote diagnosis, read DTC, clear DTC, read data stream, actuation test), accurate diagnostic data, and abundant special functions.
4. Display I/M Readiness Status.
5. Read data stream: Support diverse data stream display modes and user-defined standard data stream.
6. Local diagnosis: When the intelligent diagnosis is not available in an environment without a network, choose traditional diagnosis. Select the vehicle make and model manually to perform the vehicle detection.



Launch X-431 PAD III Vehicle Coverage:

Passenger Vehicles:

1. Australian: for AUST Holden, AUST Ford
2. Asian: for Toyota/ Lexus, Honda/ Acura, Mazda, Subaru, Nissan/ Infiniti, Mitsubishi, Hyundai, Isuzu, Daihatsu, KIA, Daewoo, Suzuki, Proton, Tata, Mahindra, Ssangyong, Perodua, Maruti
3. European: for Audi, Mercedes/ Maybach, BMW/ MINI/ Rolls Royce, VW/ Bentley/ Bugatti, Opel/ Vauxhall, Peugeot, Citroen, Volvo, Sprinter, Renault/ Dacia, Fiat/ Romeo/ Abarth/ Lancia, Rover, Landrover, Saab, Seat, Skoda, Smart, Maserati, Ferrari, Aston Martin, Porsche, Jaguar
4. USA: USA Ford/ Lincoln, GM/ Buick/ Cadillac/ Chevrolet, Chrysler/ Dodge/ Jeep
5. Chinese: for Changcheng (Great Wall), Geely, Qirui_TY(Cherry), Futian, Changan, Changhe, Haifei ….etc.
6. Special: Immobilizer/ Key, Injector, Reset Brake Bleed, Reset TPMS, Electronic Throttle Relearn, Reset DPF, Reset SAS, Reset Oil, Reset Brake, Reset BMS
7. Others: EOBD, Demo

Heavy Duty Vehicles (Optional):

for Nissan (Diesel)
for Mitsubishi (Diesel)
for USA Ford Diesel, Kenworth
for Astra, Benz Heavy Duty, Bosch Diesel, China Heavy Duty, Cummins Heavy Duty, DAF, Delphi Diesel
for Denso Diesel, FAW Liberation, Foton Auman, FUSO, Hino, Hyundai Heavy Duty, Isuzu Heavy Duty
for Iveco Heavy Duty, JAC Heavy Duty, Mack, MAN, OBD Heavy Duty, Scania, Shangchai Diesel, Volvo Heavy Duty
for WP Diesel, Airbus, Allison Transmission Box, Ashok Rejlander, Bendix ABS, Caterpillar Heavy Duty
for Chai Heavy Vehicle, Chaoyang Diesel, Construction Machinery, CREDO Heavy Vehicle, Detroit Engine
for Dongfeng Commercial Vehicle, Dongfeng Yufeng, Doosan Engine, Freightliner Heavy Duty Truck
Full Diesel Diagnosis Software, Haldex ABS Heavy Duty, HD_ABS System, HD_GoldenDragon, HD_International
HD_Kinglong, HD_Maxxforce, HD_Tata, HD_Western_Star, Heavy Truck Presentation Software
IRISBUS HD, IRIZAR HD, NEOPLAN HD, Peter HD, Renault HD, SETRA HD, Stannic Bavin, Sterling HD
Sunlong Bus, Sunwin Bus, UD Trucks 2F Nissan Diesel, WABCO ABS, Yang Chai Engine



Smartlink C VCI

Smartlink C is a new generation intelligent diagnostic box with a Linux system independently developed by Launch, which supports multiple communication modes (USB, BT, WIFI) and multiple diagnostic protocols. It can be used alone as a remote diagnosis box for SmartLink remote diagnosis, or as a pass-thru tool to connect with OEM software.

1. Support D-PDU / J2534 / RP1210 diagnostic standard, and cover passenger cars and commercial vehicles at the same time
2. Support the latest diagnosis protocol of CAN/DOIP / CAN FD
3. Support 2.4G/5G dual band
4. Support online upgrade

In the SmartLink ecology system, if a technician (SmartLink C) does not have time to puzzle through a touch vehicle problem, he can seek a trusted second opinion or additional expertise on various vehicle issues from remote master technicians or repair shops (SmartLink B). SmartLink B enables the shop owner to greatly increase customer retention and boost shop revenue by providing professional technical assistance service.
It mainly consists of the following parts:




Expanded Vehicle Coverage with Extra Adapters

Meanwhile, the X-431 PAD VII also supports 8 extended modules such as videoscope, oscilloscope, sensor box, TPMS tools, key immobilizer, and battery tester. With these extended modules, technicians are available to solve high level faults with ease, to make those extended modules, you need to pay and buy the following extended adapters, please notice.



X-431 Pad VII Spezifikation:

	X-431 PAD VII	Smartlink
Operation System	Android 9.0	N/A
CPU	2.0GHz Octa-core	N/A
Display	13.3' touch screen 1920*1080	3.5' touch screen 320*480
Memory	8GB	256M
Storage	256GB	8GB
Camera	Rear 13MP, Front 8MP	N/A
WiFi	Dual Band 2.4 & 5GHz	Dual Band 2.4 & 5GHz
Diagnostic Communication	WiFi	WiFi & BT & USB
Working Temperature	0℃~50℃	0℃~50℃
Dimension	353*236*71 mm	204*110*45 mm

LAUNCH X-431 GIII Advanced Immobilizer & Key Programmer

Description:

Work with X431 V X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII

Top 5 Reasons to Get LAUNCH X-431 GIII Advanced Immobilizer & Key Programmer:

1. Reads & writes most Engine/Gearbox ECUs without disassembling the shell
2. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
3. Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated.
4. Compatible with: X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
5. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine INS code.

6 Features for Launch X-431 GIII :

1. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
3. Supports ECU replacement for the fifth generation of Audi (0AW/0B5) gearbox.
4. Supports reading, writing & cloning the ECU for the fourth generation of VW UDS engine.
5. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).
6. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).

LAUNCH X-431 GIII Core Functions

1. Supports the BMW CAS4/CAS4+ module replacement.
2. Supports the ECU cloning and replacement for BMW Siemens engines.
3. Supports ECU replacement for the fourth-generation of VW/AUDI engine;
4. Erase the password for the Mercedes-Benz engine and gearbox within 3S.
5. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
6. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
7. Supports ECU replacement for the fifth generation of VW/AUDI Bosch and Siemens engines.
8. Integrated key matching/copy functions, anti-theft IC reading & writing, ECU reading & writing, etc.
9. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.
10. Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.
11. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).

Launch X-431 GIII Specification

Interface	DB26, DB15
Input Power	DC12V
Working CurrentMax	500mA
Power Consumption	5W
Storage Temperature	-20℃~70℃
Working Temperature	0℃~50℃
Size	228*120 mm

Package includes:

Paketliste:

1pc x X-431 PAD VIImain unit
1pc x Smartlink C diagnostic connector
1pc x Micro USB cable
1pc x Cigarette lighter cable
1pc x 5V DC out power adaptor
1pc x Battery clamps cable
1pc x OBD II extension cable
1pc x Non-16pin connector converting cable
1pc x Password envelope
1pc x Non-16pin connectors set

1pc x Launch X-431 GIII

Die Bearbeitungszeit beträgt 48 Stunden. Wenn es ein Wochenende ist, wird die kompatible Zeit verzögert.

Lieferzeit:

Wenn auf Lager in EU / Czech / Amazon / UK, 2-5 Werktage in die EU / UK, keine Mehrwertsteuer.

1. Pfosten, 10-17 Arbeitstage, keine Zoll meist. Für Deutschland und Großbritannien verwenden wir eine neue Postfirma, deren Zustellung nur 6-7 Werktage dauert.

2. YANWEN Express, 7-10 Werktag, ohne Zoll.

3. DHL: 5-7 Werktag, mit Zoll. Zoll hat die Pflicht des Kunden, aber wir schreiben als Standardwert mit niedrigem Wert, um Zollgebühren in Ihrem Land zu sparen. Wenn Sie Zollanforderungen benötigen, schreiben Sie uns bitte, wenn Sie die Bestellung aufgeben.

Finden unsere Web auf eurer Telefon:



Für Fragen, kontaktieren Sie uns bitte unter:

Telefon: +86 181 5015 2701

Whatsapp: +86 181 5015 2701

Email: sales@AutoOBD.de